Packaging and storage
Preserve in the original package under the conditions recommended on the label, and protect from light, toxic substances, excessive heat, and moisture. The packaging and container materials do not adversely affect the performance of the article used as directed in the labeling.
Expiration date
The expiration date is determined on the basis of stability studies and is not less than 18 months from the date of manufacture, the date of manufacture being the date on which the first determination of the total viable spore count was made.
Labeling
Label it to state that it is a Biological Indicator for Dry-Heat Sterilization, Paper Carrier; to indicate its D value and the method used to determine such D value, i.e., by spore count or fraction negative procedure after graded exposures to the sterilization conditions; the survival time and kill time under the specified sterilization conditions stated on the label; its particular total viable spore count, with a statement that such count has been determined after preliminary heat treatment; and its recommended storage conditions. State in the labeling the size of the paper carrier, the strain and ATCC number from which the spores were derived, and instructions for spore recovery and for safe disposal of the indicator. Indicate in the labeling that the stated D value is reproducible only under the exact conditions under which it was determined, that the user would not necessarily obtain the same result, and that the user should determine the suitability of the biological indicator for the particular use.
Identification
The biological indicator organism complies substantially with the morphological, cultural, and biochemical characteristics of the strain of Bacillus subtilis, ATCC No. 9372, designated subspecies niger, detailed for that biological indicator organism under Biological Indicator for Ethylene Oxide Sterilization, Paper Carrier.
Resistance performance tests
D value
Proceed as directed for the relevant procedure for
D Value under
Biological IndicatorsResistance Performance Tests 55. The requirements of the test are met if the determined
D value is within 20% of the labeled
D value for the selected sterilizing temperature, and if the confidence limits of the estimate are within 10% of the determined
D value.
Survival time and kill time
Proceed as directed for
Survival Time and Kill Time in the section
Dry-Heat Sterilization,
Paper Carrier, under
Biological Indicators
Resistance Performance Tests 55. The requirements of the test are met if all of the specimens subjected to dry-heat sterilization for the survival time show evidence of growth, while none of the specimens subjected to dry-heat sterilization for the kill time shows growth. If for either the survival time test or the kill time test not more than 1 specimen out of both groups fails the survival requirement or the kill requirement (whichever is applicable), continue the corresponding test with 4 additional groups, each consisting of 20 specimens, according to the procedure described. If all of the additional specimens subjected to dry-heat sterilization either meet the survival requirement for the survival time test or meet the kill requirement for the kill time test, whichever is applicable, the requirements of the test are met.
Purity
Presence of contamination by other microorganisms
By examination of the spores on a suitable plate culture medium, there is no evidence of contamination with other microorganisms.
Disposal
Prior to destruction or discard, sterilize it by steam at 121
for not less than 30 minutes, or by not less than an equivalent method recommended by the manufacturer. This includes a test strip employed in any test procedures for the strips themselves.